How Much Does an Electrician Cost in Worcester, MA?
Typical 2026 price ranges for common electrical jobs in Worcester County, plus what actually drives the cost.
What Electrical Work Costs in Worcester County
Electrical work in Worcester County is usually priced by the job, not just by the hour. What you pay depends on the size of the job, the age and condition of your wiring, whether a permit and inspection are needed, and how easy the work is to reach. The ranges here help you budget with confidence. For an exact number, the most reliable step is a free estimate on your actual project.
Typical 2026 Worcester County Price Ranges
| Service call (1 to 2 hours) | $250 to $450 |
| Install or replace an outlet or switch | $200 to $300 |
| Service upgrade (100A to 200A) | $4,500 to $6,500 |
| EV charger (Level 2, installed) | $1,250 to $1,850 |
| Portable generator (installed) | $1,150 to $1,650 |
| Whole-home rewiring | $20,000 to $30,000 |
| Electrical permit (Worcester) | $150 to $250 |
Ranges are typical Bergeron pricing, not a quote. Get a free estimate for your exact price.
Typical Prices for Common Jobs
These are typical 2026 price ranges for common electrical jobs in the Worcester area. Your exact price depends on your home, so treat the numbers as a starting point, not a quote.
Age of your wiring and panel - Whether a permit is needed - Distance from the panel - Access behind finished walls - Amperage and equipment - Emergency vs scheduled work
Free Estimate
Links
What Drives the Price
A few things move a quote up or down: the age and condition of your existing wiring and panel, whether the work needs a permit and inspection, how far a new circuit runs from the panel, and how easy the work is to reach behind finished walls. Worcester has a lot of older housing stock, and older wiring, tight access, and outdated panels all add labor. Fishing wire through a finished, insulated wall takes far longer than running it along an open basement wall.
Emergency and after-hours work usually carries a premium because someone is coming out on short notice. And a licensed, insured team that pulls permits and documents the work is not the cheapest quote you will get, but it is the one that holds up on inspection and at resale.
Permits & Inspections
Most electrical work in Worcester needs a permit, usually a small part of the total, in the range of $150 to $250 depending on scope. A licensed electrician pulls the permit and schedules the inspection so the work is documented and to code. Fees vary by town, so Shrewsbury, Holden, and Auburn can differ from Worcester.
Rebates & Tax Credits
Some upgrades qualify for money back. Mass Save offers rebates on qualifying electrical, heat pump, and EV related work for eligible Massachusetts homeowners, and federal tax credits may apply to EV charger installations in eligible areas. Programs and deadlines change, so confirm current eligibility before you count on a credit.
Get an Exact Price
Ranges are a starting point. The only way to get a real number is a look at your actual panel and wiring. Bergeron Contracting gives free, no pressure estimates across Worcester County. Use the form on this page or call (508) 735-7245.
Hourly Rate or Flat Rate: How Electricians Price Work
Electricians price work two ways, and the difference matters. Hourly pricing is common for troubleshooting and small tasks where nobody knows exactly what they will find until things are opened up. Flat-rate pricing is common for defined jobs like installing an outlet, upgrading a panel, or adding a circuit, where the scope is clear.
We prefer to quote defined work as a flat rate whenever we can. It puts the cost on the table before we start, so there is no meter running and no surprise at the end. For diagnostic calls, we are upfront about the rate before we come out. A typical service call covering the first one to two hours runs about $250 to $450.
What a Fair Electrical Quote Includes
A quote you can trust spells out the scope of work, the materials, the labor, the permit fee, and any inspection. It should say whether the work is warrantied, and it should come from a licensed and insured electrician whose license number you can verify.
When you compare quotes, compare like for like. The lowest number sometimes leaves out the permit, the inspection, or the panel work the job actually needs, and that gap shows up later. If a quote is a single number with no detail, ask for the breakdown before you sign.
Free, No-Pressure Estimates
Every estimate is free and comes with a clear written scope. We assess your actual panel and wiring, explain your options, and give you a real number, not a guess. No pressure and no obligation.
Fully Licensed & Insured
Every job is completed under MA Master License #21807-A. We carry full liability insurance and workers compensation on every project so you are fully protected from the first day on site through the final inspection.
Services These Prices Cover
The ranges above cover the electrical work Worcester County homeowners ask about most:
What Worcester Customers Say
Frequently Asked Questions
For small jobs, a service call runs about $250 to $450. Larger projects are priced by the job: a 100A to 200A service upgrade runs $4,500 to $6,500, an EV charger install $1,250 to $1,850, and a portable generator setup $1,150 to $1,650. The best way to know your price is a free estimate.
No. Estimates are free and come with a written scope. We assess your panel and wiring and give you a real number before any work begins.
Because electrical work depends on your home. The age of your wiring and panel, permit requirements, circuit runs, and access all affect the price. Older homes and bigger jobs sit at the higher end.
Yes. When a permit is required, the fee is included in your estimate and we handle the filing and inspection.
Sometimes. Mass Save rebates and federal tax credits can apply to qualifying work like EV chargers and heat pump circuits. We can point you in the right direction, and you confirm current eligibility.
A typical service call covering the first one to two hours runs about $250 to $450. Larger, defined jobs are quoted at a flat rate so you know the total upfront.
For defined work, a flat rate usually protects you better because the price is fixed before the job starts. Hourly makes sense for troubleshooting where the scope is unknown.
Often because it leaves something out: the permit, the inspection, or the panel capacity the job actually needs. Always compare the full scope, not just the bottom line.